In this study, first by surveythe parameters affecting the compressive strength, such as water to cement ratio, cementgrade, silica fume to cement percentage, and the various ratios oflight weight aggregate LECA, to total aggregate, Taguchi method is used, to test 9 mix designsobtained the mix design optimization. Since lightweight concrete is brittle like normal concrete, to resolve this probl...

methods are proposed to develop idealized moment-curvature response curves of slender rectangular rc wall sections with uniformly distributed longitudinal reinforcement, using limit states, namely, cracking of concrete in tension, tensile yielding of reinforcement layers, and compression failure of concrete. it is recommended that tensile yielding of an inner layer of reinforcement is considere...

concrete beams reinforced with glass fiber reinforced polymer (gfrp) bars exhibit large deflections and crack widths as compared with steel reinforced concrete beams due to the low modulus of elasticity of gfrp bars. different studies show that aci 318 equation for the effective moment of inertia ie does not predict deflection well for frp reinforced concrete beams. the purpose of this paper is...

In reinforced concrete design, there are situations where transfer of shear across a specific plane needs to be considered. Examples of such situation include corbels, bearing shoes, ledger beam bearing, and a host of connection between precast concrete elements. In this study, the shear transfer behavior of reinforced concrete is investigated experimentally by conducting test on 6 precracked p...

Flanged shear walls are used extensively in moderate- and high-rise buildings to resist lateral loads induced by earthquakes. The seismic performance of many buildings is, therefore, closely linked to the behavior of the reinforced concrete walls. They must be carefully designed to provide not only adequate strength, but also sufficient ductility to avoid brittle failure under strong lateral lo...

in reinforced concrete design, there are situations where transfer of shear across a specific plane needs to be considered. examples of such situation include corbels, bearing shoes, ledger beam bearing, and a host of connection between precast concrete elements. in this study, the shear transfer behavior of reinforced concrete is investigated experimentally by conducting test on 6 precracked p...

In this study, twenty glass fiber reinforced polymer (GFRP) reinforced concrete specimens were modelled using finite element method to predict the effect of GFRP compressive bars on the flexural strength and ductility of GFRP reinforced concrete beams. Also, the contribution of GFRP longitudinal rebars to the load-carrying capacity of reinforced concrete columns is determined. The concrete elas...

a reinforced concrete member in which the total span or shear span is especially small in relation to its depth is called a deep beam. in this study, a new approach based on the adaptive neural fuzzy inference system (anfis) is used to predict the shear strength of reinforced concrete (rc) deep beams. a constitutive relationship was obtained correlating the ultimate load with seven mechanical a...

the use of polymer composite (frp) as a reinforcement material for the repair and strengthening of important components of reinforced concrete structures, particularly columns, has found wide spread. in this study, the effect of intermediate layer on improving the confinement behavior of reinforced concrete columns has been investigated. to achieve the objectives of the study, 14 cylindrical re...

three unconventional details for plastic hinges of bridge columns subjected to seismic loads were developed, designed, and implemented in a large-scale, four-span reinforced concrete bridge. shape memory alloys (sma), special engineered cementitious composites (ecc), elastomeric pads embedded into columns, and post-tensioning were used in three different piers. the bridge model was subjected to...